Built into the designer
Design with Tig.
Enter the product type, labeled dimensions, member sizes, spacing, layout, and components. Tig applies the recognized values right inside the Designer; then inspect and fine-tune the editable result by hand.
Tig does not determine code requirements, perform engineering, or replace your review.
How it works
Describe it, watch it draw, then refine.
- 1
Describe
Supply an exact shop spec with labeled dimensions and Designer terminology.
- 2
Watch it draw
Tig builds the design live on the canvas in seconds — a fully editable drawing, not a picture.
- 3
Refine
Not quite right? Ask Tig to adjust it, or take over and fine-tune by hand — same designer, no re-import.
Example prompts
The kind of spec Tig understands.
“12 ft wide by 6 ft tall double swing gate, 2 inch frame, arched top, 3/4 inch vertical pickets, spear finials”
“8 ft wide by 6 ft tall slide gate, flat top, 1 inch square pickets at 4 inch clear spacing, no decorative elements”
“Ask me for the info that you need”
“Simple fence panel, 5 feet tall, peaked top, with rings between every other picket”
“Chain link cantilever slide gate, 20 foot opening, 6 feet tall”
“Puerta doble de 6 pies con arco, pickets de 1 pulgada con espacio de 4 pulgadas”
Tig designs from our curated component library — and we add new parts on request. Send us a supplier and part number and our team draws it into your library, ready for Tig to drop onto any drawing.
See the component library →Try Tig free.
Describe a design and watch Tig draw it — no account required. Sign up when you are ready to save or download.
No credit card to start. Already have an account? Log in