Site Plan · Beta
From the gate design to the installation plan
The gate is just the beginning. Bring operators, access controls, loops, concrete pads, and conduit together in one measured layout.
See the installation
Every piece has a place
Show how the gate and its equipment fit together, from the entry system to the operator pads and vehicle loops.
- Gate operators, access controls, and detection devices in the same plan
- Concrete pads and conduit routes shown alongside the equipment they serve
- Gate paths, labels, and dimensions to review the layout before installation
Work through the details
Put a measurement to the layout
Measure between drawing points, adjust equipment placement, and add the labels and notes that make the plan clear.
Design. Plan. Share
Carry your gate design into the next stage of the job
- 1
Start with your gate
Save a gate in Designer, then open its Site Plan with the gate, posts, and columns as your starting geometry.
- 2
Lay out the installation
Place operators, access controls, and detection devices. Adjust the pads, loop locations, and conduit routes around them.
- 3
Measure and share
Add dimensions, labels, and notes. Save the editable plan and download a PDF or PNG in landscape or portrait.
Plan the installation before the work begins
Try Site Plan with a 7-day free trial of ODP Full Access.
No credit card to start. No charge unless you choose a plan.